How to completely remove hamachi from your computer. We solve the problem of connecting Hamachi to a network adapter How to completely remove hamachi from a computer

Sometimes errors occur during the uninstallation of Logmeln Hamachi in order to upgrade to a new version or clean the OS. "The older version ... cannot be removed" (cannot remove the old version), "...trying to use is on a network resource ...Click OK to try again" (the network resource is not available, try again), "The resource with the installation files is not available" - all these messages signal that the application is not removed.

In such cases, one system delete function is not enough. It is necessary to additionally use third-party utilities, the registry editor, or a special patch from Microsoft.

But, as they say, first things first. Let's consider each of the methods separately.

Method #1: Soft Organizer

Using Soft Organizer to remove Hamachi is very simple and fast. Download this utility from an official or trusted site, install it on your PC and run it. And then do the following:

1. In the program window, in the list of software installed in the OS, click on Hamachi with the left button (once!).

2. At the top, above the list, click the Uninstall a program button.

3. The "native" uninstaller of the application is activated. In its panel, check the box next to the option "Delete all settings ...". And then click on the "Delete" button.

Attention! If an error occurs when activating the built-in uninstaller or a message appears indicating the reason why Hamachi is not removed, close the additional window that appears (“OK”, “Cancel”) and continue the cleaning procedure in Soft Organizer.

4. When the standard removal is completed, in the "Produced ..." window, click the "Find" button.

5. After scanning the system, the program will report the remaining Hamachi elements found and offer to get rid of them. Click Remove to continue cleaning.

Wait until the end of the operation. Upon successful completion, the Hamachi network icon will disappear from the tray.

Method number 2: standard removal + registry cleaning

Uninstalling program elements

Open the "Start" menu (click on the "Windows" icon).
Select Control Panel.
In the "Programs" block, activate the "Uninstall a program" option.
Highlight the Hamachi application in the software list with a mouse click.
Click "Delete" in the top bar.
Follow the instructions of the uninstaller.

If the uninstaller does not activate, errors appear, do the following (for Windows 7/8):

turn off the Hamachi network connection, close the program (right-click on the tray icon → Exit);
open directory: Windows → system32 → config → systemprofile → localsettings → appdata → locallow;
delete the LogMeIn Hamachi folder in it.

Deleting keys in the system registry

1. Open the editor:

press "Win + R";
in the "Run" line, enter - regedit;
press Enter.

2. Delete the following entries in the registry (if any):

HKEY_LOCAL_MACHINE → SOFTWARE → LogMeIn Hamachi HKEY_LOCAL_MACHINE → SYSTEM → CurrentControlSet → Services → Hamachi2Svc
HKEY_LOCAL_MACHINE → SYSTEM → CurrentControlSet → Services → hamachi

Click on the folder you want to remove from your computer with the right mouse button. And then click "Delete" in the context menu.

Method number 3: software tool from Microsoft

1. Open the page in your browser - support.microsoft.com/ru-ru/mats/program_install_and_uninstall (Microsoft support site).

2. Under the heading "Unable to install ...", in the "Fixit" block, click the "Run now" button.

3. Wait for the download to finish (it will take only 5-10 seconds) and run the utility as an administrator.

4. Wait a while for the utility module to load.

5. Choose a troubleshooting method:

"Identify problems ..." - automatic mode (recommended);
"Find problems ..." - diagnostics and selective correction.

6. Specify the type of problem - "Delete".

7. Select LogMeIn Hamachi from the list of programs (check the radio button) and click Next.

8. In the window with the request "Delete and clean up?" select Yes, try uninstalling.

9.If Hamachi was successfully uninstalled, the Troubleshooting Completed window will show the status "Resolved".

11. Report the result of the procedure to Microsoft technical support (select an answer from the list) or close the utility window without sending a message.

Hamachi is one of the most popular virtual networking software. It differs from the rest of the provision of stability and applicability in different areas. However, the components of this software are quite tightly immersed in the operating system, occupying registry settings, creating separate services and virtual drivers. This leads to the fact that after the standard removal of software, many traces of Hamachi still remain on the computer. Because the user has to manually clean it all. In this article, we will talk about the complete cleansing of the OS from traces of Hamachi, having analyzed two visual methods.

Next, you will be introduced to the manual and automatic method of uninstalling Hamachi. We want to note right away that the second one is not always successful, because not every auxiliary software is able to cope with all traces of software. Therefore, we first recommend studying this method, checking it, and in case of ineffectiveness, proceed to self-cleaning of the “tails”.

Method 1: Software for uninstalling programs

Now on the Internet there is a fairly large number of various auxiliary software, among it is one that allows you to remove unnecessary software. This will work with Hamachi, but there is no guarantee that absolutely all traces will be cleared. Now we propose to quickly study the implementation of this procedure using the example of a well-known solution called CCleaner:

As mentioned above, there are quite a few analogues of CCleaner. You can choose the most suitable option from all the offers. We advise you to get acquainted with the most popular solutions for the implementation of the task in our other material by clicking on the link below.

Method 2: Remove Hamachi by yourself

Now let's move on to a more complex, but the most effective method - to remove Hamachi from the operating system on your own. We have divided this procedure into stages to make it easier for you to study the presented guide. Let's start with the very first steps.

Step 1: Initial uninstallation

The first step can be skipped for those who have already used the first method, but Hamachi's tails remain on the PC. For such users, we immediately recommend moving on. If you have not yet removed the main components of the program in question, do it like this:

open "Start" and go to section "Options".

Select a category here "Applications".

Find Hamachi in the list and click on this line.

Click on an item "Delete".

Follow the instructions in the window "Removing LogMeIn Hamachi".

Wait for the operation to complete and proceed to the next step.

Usually, uninstallation cleans the system only of the main components of Hamachi, that is, you will no longer be able to use the program. However, this leaves the driver, services, and other files associated with the tool on the computer. Their removal will be discussed further.

Step 2: Deleting Hamachi Folders and Files

After the successful completion of the first stage, all files remaining on the disk are found and cleaned. Search for them must be performed taking into account exactly where you installed the software. Usually it is added to the system partition, so go through these directories:

C:\Program Files (x86)\
C:\Users\USERNAME\AppData\Local
C:\ProgramData\

If you do not see some of these folders, first turn off their invisibility, since the last two directories are hidden by default.

Delete any references you find to Hamachi or LogMeIn. Do this only if there is no other software from this developer on the PC.

Step 3: Remove the virtual network driver

Since the application being removed belongs to virtual networks, accordingly, it installs its own network driver, which can sometimes interfere with the correct operation of the Internet. Getting rid of it happens in just a few clicks:

After the implementation of this instruction, access to the network should appear, if suddenly it was absent. However, this does not always happen immediately. Restart your computer for all changes to take effect.

Step 4: Remove registry settings

Hamachi, like almost any software, during its installation enters certain parameters into the Windows registry, which leads to the appearance of various dependencies and conflicts after the removal of the software itself. Therefore, you will need to study the contents of the registry in detail and remove everything related to this application from there.

Run the utility "Run" by pressing the key combination Win+R. In the input field write regedit and click on "OK".

Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\ by pasting this address into the top line or manually opening each subfolder.

Here, using the arrows on the keyboard, navigate through the directories with symbolic names and inside them pay attention to the value of the parameter "ProductName".

Find the folder where the mentioned parameter will have a value "Log Me In Hamachi".

Rename this library (the one on the left side of the window) by slightly changing its name to whatever you like. This is necessary so that in the future there are no possible conflicts with the program installer.

Then expand the context menu "Edit" and select a tool "Find".

Set search parameter "Hamachi" and remove any matches found.

Of course, don't forget to restart your PC after deleting all settings to get your system up and running.

Step 5: Removing the Service

The last step in completely removing Hamachi from your computer is to get rid of the service that may accidentally remain after a standard uninstall. Without the software itself, it performs absolutely no action, therefore it is simply not needed.

open "Run" (Win+R), where enter services.msc and press the key Enter or button "OK".

Among all the services present, look for "LogMeIn Hamachi Tunneling Engine" and double click on it.

In chapter "Are common" copy the service name.

Run "Command line" on behalf of the administrator by any convenient method.

Write there sc delete Hamachi2Svc , where Hamachi2Svc- the name of the copied service, and click on Enter.

You should receive a notification that the operation was successful.

If you received a notice "Access denied", then you will need to log into the operating system under an administrator account and only then try again. You will find all the necessary information on this topic below.

Above, you have been familiarized with the procedure for completely uninstalling LogMeIn Hamachi from your computer. As you can see, it takes a lot of time and is not an easy task. However, after completing all the steps, you can be one hundred percent sure that all traces of Hamachi have been successfully cleared.

Gamers regularly delete games from a personal computer after they have achieved all the results. In some cases, people do not know how this process is carried out. So, often users are interested in how to remove Hamachi completely.

Many gamers are interested in how to properly remove Hamachi

This need may also arise due to the fact that this toy takes up hard drive space that a person needs to store other data. Find out how uninstall any application you can on our portal.

Instructions for the complete removal of Hamachi

To eliminate this toy, you must first use the regular means of the system. The whole process is carried out as follows:

The Control Panel window launches. Through it, you can also delete hiberfil, which is a file that uses hibernation mode.
A transition is made to a subsection called "Programs and Features".
A search is made for the liquidated program in the list that appears, and then it is highlighted.
The "Delete" button is pressed.
The same button in the confirmation window is activated.

These manipulations allow you to start the toy master. It is necessary to follow the prompts that allow you to uninstall. Next, the game folder is erased. It can be found in the Program Files directory. However, it can be not only in this place, but also somewhere else.

In the Program Files folder, find the folder with Hamachi

The location of this daddy should be looked for in the directory where Hamachi was installed. In addition, it is recommended to look for residual toy files. To do this, you need to go to a folder called Documents and Settings.

The final deletion of files is done in the Documents folder

It, of course, is located on drive C. Then you need to open the folder with the username. Then a transition is made to Application Data or Appdata, depending on the version of the OS. Here you need to erase everything related to the game. At the end of the whole process, the trash is emptied.

Cleaning the registry

This procedure is carried out to remove the "tails" of Hamachi. This operation is always carried out with extreme caution, since you need not to make a mistake and not eliminate unnecessary files. Otherwise, the system will be unstable or even stop functioning.

Then it will have to be reinstalled. Therefore, it is recommended to use special utilities for such an operation. One of them is CCleaner. It is available to users for free on the official website of the developer.

At the same time, this software is convenient and completely safe. It will 100% clean the system of any rubbish. The algorithm for working with this program is as follows:

Download, install and run the software.
The "Register" button is pressed. It is located on the left side of the software window on a gray background.
Click on the "Search for problems" button.
The "Fix" button is activated after the registry scan is completed.
After all the manipulations, it remains to close the auxiliary software window.

Hamachi is a popular program used to combine several different computers from any location into one single local area network. If the program is configured incorrectly, the user cannot avoid problems in its operation. In particular, below will be considered the situation when Hamachi reports a problem in the tunnel.

What is causing the problem?

As a rule, the presence of problems in the Hamahi tunnel is due to two reasons: either the connection is inactive in Windows, or the program is configured incorrectly. Below we will analyze the ways that will allow you to work with the program.

Method 1: Activate the network connection

First of all, it is worth suspecting that Hamachi's network connection is simply disabled on the computer. And turning it on won't be too much of a problem.

To do this, open "Control Panel" and navigate to the section.

In the left area of the window, open the section.

A list of available networks will be displayed on the screen. If the Hamachi network is greyed out, right-click on it and select "Turn on".

Method 2: reinstalling the program

You can try to solve problems with any program by simply reinstalling it.

First you need to remove Hamachi from your computer. To do this, open "Control Panel", go to section "Programs and Features", find Hamachi in the list of installed programs, right-click on it and select "Delete".

Finish uninstalling the program. After that, it is recommended to restart the computer.

Follow the link at the end of the article to the main website of the product manufacturer and download the latest distribution of the program. Perform a fresh installation of the program on your computer.

Method 3: Configuring Hamachi Network Settings

To do this, open "Control Panel" and go to section "Network and Sharing Center".

In the left area of the window, click the button "Change adapter settings".

Right click on Hamachi and go to the item "Properties".

Highlight an item "IP version 4" and then just below click on the button "Properties".

Click the button at the bottom of the new window "Additionally".

In the block "Main gateways" select the gateway and then click on the button "Delete". Uncheck the checkbox next to the item below "Auto Metric Assignment" and set the value below "10". Save your changes.

Method 4: Editing Hamachi Options

Run the program. Click the button in the upper left corner "System", and then select "Options".

In the left area of the window, go to the tab "Options" and then click the button "Additional settings". Set the following options:

Encryption - any;
Compression - any;
Traffic filtering - allow all;
Online presence - enable;
Use a proxy server - no.

Save changes and close the settings window. Now click on the power button to activate the program.

Method 5: Adding Hamachi to the antivirus exclusion list

In more rare cases, the antivirus installed on the computer may mistake Hamachi and its activities for a virus threat.

To check this, you will need to disable the antivirus, and then resume the program. If the problem is gone, you will need to go to the antivirus settings and add the Hamachi program to the list of exceptions.

Instruction

First of all, click the "Start" button, then "Control Panel". Find the "Network Connections" tab and launch it. If you have display by category enabled, then the tab will be in the "Network and to the Internet" section. Find the one you want in the list of connections.

There are several restrictions when deleting network connections. If your network connection is part of the network, then before deleting, delete the network bridge itself (which you can then recreate if you need it). You should not delete virtual connections created by network programs (for example, virtual private network adapters created by OpenVPN or Hamachi) on your own - they are deleted by means of these programs. It also makes no sense to delete the connections of network cards and IEEE-1394 (Fire-Wire) adapters - they will still be recreated by the operating system at the next reboot. Some of the described connections simply cannot be deleted - the "delete" menu item is not available for them.

note

Be careful when deleting connections - although it does not threaten any system problems, you may lose settings that you will have to do again if you make a mistake and delete the connection you are using.

Removing a network adapter may be required if the adapter is physically missing or if the system automatically assigns the same IP address to a hidden ghost adapter. Solving the problem will require some changes in the Windows system registry.

You will need

-devcon

Instruction

Click the "Start" button to bring up the main menu of the system and go to the "Run" item to enter the command line tool.

Enter the cmd.exe value in the "Open" field of the application window and press the Enter key to confirm your choice.

Enter the value set devmgr_show_nonpresent_devices=1 in the command line field and press the Enter softkey to confirm the execution of the command.

Enter the following value Start DEVMGMT.MSC in the command line field and confirm the execution of the selected command by pressing the Enter key.

Select Show Hidden Devices from the View menu of the command line application window.

Open the list of devices (tree) "Network adapters" by clicking on the field with the "+" icon on the left side of the computer monitor screen.

Select "Remove". An alternative way to remove a network adapter is to use the DevCon program, which has a command line interface and is used to enable, disable, restart, update, and remove individual devices or a group of devices. The program is available for download from the official Microsoft website.

Download the DevCon tool according to Microsoft's instructions.

Unzip the 32-bit or 64-bit DevCon binary to a local folder.

Return to the main Start menu and select Run to launch the command line utility.

Enter cmd in the Open field and press the Enter key to confirm your choice.

Enter CD:BinaryPath to navigate to the folder containing the devcon.exe file.

Run devcon findall =net or devcon listclass net to search for installed network adapters.

Remove the hidden network adapter using the command
devcon -r remove
‘@PCIVEN_10B7&DEV_9200&SUBSYS_00D81028&REV_784&19FD8D60&0&58F0’.