I don’t remember my computer password, what should I do? How to unlock a Windows laptop if you forgot your password

Login to the system is under a password, about which there is no information or it has simply been forgotten. Believe me, Windows XP is not a rusty iron lock with a lost key that cannot be cracked using a radical method. Let's look at some ways.

Passwords help protect your account in operating systems from unauthorized users. However, it also happens that they are forgotten, and it is not possible to get into the system from an administrator account, and you don’t have the installation media with you. In this case, you will have to reset the password using slightly non-standard methods.

Removing the password from Windows 7 without installation media

If you are unable to download a password reset disk for Windows 7, you can use one of the methods suggested below. Both involve solving the problem using system utilities. To do this, you do not need to download a Windows 7 password reset disk or a full system image. However, it is recommended to strictly follow the instructions, since both methods involve working with the interface "Consoles".

There is no need to try to reset your Windows 7 password using third-party software, as this will lead to certain problems.

Method 1: Command Line

This is the most universal, simple and secure way to change your Windows 7 password without knowing the old one. If necessary, you can later simply remove the new password from the operating system. To perform this method, you will need to be able to log into the OS interface, even from a guest account. Usually this is always there by default.

The Guest account has some limitations compared to the Administrator account. By default, they apply to making any changes to the OS, for example, installing/uninstalling programs, editing some documents, downloading content from the network. Restrictions on use "Command line" no by default.

The instructions for this method are as follows:

1. 1. Press the key combination Win+R.
   2. In the line that opens, enter cmd and click Enter.

1. 1. Will start "Command line". First, you need to find out the number of users, their powers and logins in the operating system. To do this, enter the command net user and click Enter.

1. 1. A list of all operating system users is displayed. You need to find the administrator account login. This will be easy to do if there are only two accounts in the OS.
   2. Now write the command net user administrator_login new_password. Example command: net user Admin 123456. Press Enter.

1. After applying the command, restart your computer and log into the administrator account with a new password.

Method 2: Recovery Menu

This method can be dangerous, as it involves disconnecting the computer from power while it is running. However, a single use should not cause much harm.

The bottom line is this:

1. 1. Restart your computer if it was turned on or turn it on if it was turned off.
   2. When Windows starts loading, turn it off abruptly. For example, press the power button or unplug the power cable.
   3. Then reconnect the power and turn on the PC.
   4. Instead of the standard Windows startup, the screen should start "Windows Error Recovery", that is, recovery from an error.
   5. You will be offered several options for starting the operating system. Select "Launch Startup Repair". In the Russian version it may be called "Run boot repair".

1. 1. The system will begin loading. You may see a window asking for permission to perform a system restore procedure ( "System Restore"). Cancel by clicking on "Cancel".

1. 1. A recovery error message appears. Click on the item "View problem details".

1. 1. A text file describing the problem will open. Here you need to click on the item "File" in the top menu. From the drop-down list, click on the item "Open".

1. Will open "Conductor" Windows with access to all system files. You need to go to the following path: C:\Windows\System32.
2. Here, find and rename one of these files utilman.exe or sethc.exe, adding the postscript bak or old to the name of one of them. If these files are not displayed in Explorer, then in the column "File Type" set the value "All files".
3. Now find the cmd.exe file. Copy it and paste it in the same directory.
4. Rename the copied file to "utilman" or "sethc". No need to rename the file to "utilman", if in step 10 you added a postscript to the file "sethc" and vice versa.
5. You can close "Notebook" and press "Finish". After this, the system will reboot.
6. Wait for the Windows start screen to load and click on the icon "Special abilities", if you renamed the file to "utilman". If you renamed it to "sethc", then you will need to press the key five times Shift.

This way you will have access to "Command line" without having any access to the system. In the interface "Consoles" you will have to do the following:

1. 1. If you do not know the exact name of the administrator account, then enter the command net user. It will display all data regarding system users, including their status.

1. 1. Now write this command: net user Administrator account name new password. Example command, net user Admin 123456. Press Enter.

1. Restart your computer and try logging in with the new password you set.

The methods discussed above help you reset your password on Windows 7 without using a disk with an OS image. However, it is recommended to create a system recovery image on a flash drive (installation disk) and perform a reset through it.

It would do well for any personal computer user to know how to unlock a computer if they have forgotten their access passwords.

No special knowledge required. After following a simple algorithm of actions, in a few minutes you will be able to work on your PC.

How to restore access in Windows 7 and Windows 8?

A password is required to protect private information from unauthorized persons. It does not allow you to log in by simply turning it on. However, if the code is lost or the system has been updated, then access to the data becomes impossible. Each version of Windows OS operates differently.

The Windows 7 operating system is the most popular among the rest. It is very convenient to use. And the process of gaining account access is also quite simple.

But if the user is unable to log in to his account, then he should follow a series of steps listed below:

1. You need to restart the PC, then hold down the F8 key and bring up the menu.
2. Use the navigation keys to go to the “Safe Mode” line and press Enter.
3. Wait until the operating system boots. Then select an account to log in under the name “Administrator” (standard profile, free of a password).
4. The next step is to close the Safe Mode help window and go to Control Panel through the Start menu or another method.
5. Open “User Accounts”, log into your personal profile and click on “Change Password”.
6. Enter a new combination of numbers and numbers in the field, and then save by pressing the desired keys.
7. After this, you need to restart the computer again and enter the new code in the appropriate field.

"Eight" is only gaining its popularity. To begin with, it is important to make sure that the computer is connected to the network, and during the entire process it is not recommended to unplug the plug from the socket.

To resume work on it if you have lost your password, you need to do the following.

• when logging in, you need to click on the power icon, which is located on the right;
• hold down the Shift button;
• then - “Select action” in the menu that appears;
• go to “Diagnostics” by clicking on it;
• then click “Return to original state” and click the “Next” button;
• wait until the reboot is completed, the presence of the disk is required, without it the action will not be completed;
• at the end you need to select “Just delete my files”.

Recovery using a Flash Card

A flash drive will help you quickly access your computer. The main thing is to first write the file to the memory card and do several tasks:

• turn off the computer and insert a USB flash drive, turn on the computer;
• click on account;
• type any combination of numbers and letters and press Enter; when the “Invalid username or password” window appears, you will be asked to restore it;
• By clicking on the inscription, you will open the “Password Recovery Wizard”;
• then click on the “Next” button, point to the required flash drive;
• again click on “Next”, enter a new password and select “Done”.

You can then log in with the new password.

To have such a USB flash drive at hand, you need:

1. Click on “Start”, go to “Control Panel”.
2. Select the “User Accounts” tab.
3. Click on “Create a password reset disk”.
4. Simultaneously press the Ctrl, Alt, Del keys.
5. Select the “Change password” section.
6. Click on the required account and select “Create a password recovery diskette.”
7. Insert the USB flash drive and click “Next” in the “Wizard”.
8. In the window that appears, select the USB flash drive device, then click “Next”.
9. After recording, the userkey.psw file will appear on the USB device. At the end of the operation, click “Next” and “Finish”.
10. Resume the system.

A flash card is not the only way to fix problems. The file can be copied to your hard drive.

It is important to be especially careful when performing these steps.

By following these instructions it is easy to achieve the desired result.

LediZnaet.ru

How to unlock your computer if you forgot your password

Admin 08/26/2014 - 16:09 Workshop

Sometimes a situation arises when the computer is locked, and the user is unable to guess the password for the account. This state of affairs is rare, but memory is unpredictable, and the operating system cannot directly tell us (except for a user hint, if one was created in advance).

Naturally, to log into the system you will need to reset or change your account password, since it is impossible to remember! To describe this, let’s take an average case where actions are not hampered by other reasons, and the standard installation of Windows favors a successful outcome.

Unlock the computer

An account password or simply an “account” is quite a useful thing, but having forgotten or lost the treasured combination, it is impossible to log in to the system, both for strangers and for you personally. Well, if no changes were made to the accounts, then restoring the login will take a few minutes.

• We restart the computer, and after the BIOS picture, press the “F8” key to call up the boot menu.
• Use the navigation keys to move to the “Safe Mode” line and press “Enter”.
• We are waiting for the operating system to load. To log in, select an “account” under the name “Administrator” (standard profile without a password).
• Close the help window about Safe Mode and go to the “Control Panel” through the “Start menu” or in a way convenient for you.
• Open the “User Accounts” section. Go to your personal profile and click “change password”.
• In the field, enter a new combination of characters and save by pressing the appropriate button (if the input field is left empty, the password will be reset).
• After manipulating the password, we reboot. Now all that remains is to enter a new password (if one has been set) and log in to Windows.

Note! If your profile is the only account, then the above actions will be powerless. But there is always another solution, for example, try restoring access via the command line, this method was discussed earlier and will require a Windows boot disk.

P.S.

As you understand, a trivial case will require minimal time investment, but there is also a way out for solving non-standard situations. So don’t go to extremes, and try to avoid changes in the “accounts” section.

wd-x.ru

What to do if you forgot your Windows 7 password?

There are situations when, thinking about protecting their computer, and along with it the information located on the hard drive, a person comes up with a complex and at the same time reliable password for logging into Windows. All this is good, of course, but you can forget a complex password completely by accident.

What to do if you forgot your Windows 7 password?

Especially often, such a negative situation can arise at a time when access to a computer is very necessary and the question immediately arises: what to do if you forgot your Windows 7 password? Although this is not a pleasant situation, there is a solution and we will consider it using Windows 7 as an example.

To solve the problem, you need to be a little hacker, although you don’t have to do anything special, and to reset the password we need a bootable or otherwise Windows 7 installation disk, a bootable USB flash drive will also do.

Using a Windows 7 boot disk

You will need media from which you can install Windows to try to recover your login password. Next, you will need to boot the computer from the boot disk through the boot menu - usually when you start the computer, the keys are used: or, or, or, different manufacturers of computer components use different versions for the bootloader, and in our example this is the key. You can also boot from a disk, of course in a slightly more complicated way, by making settings in the BIOS.

my response Peri- and post-natal development studies in which female rats received subcutaneous injections of cidofovir once daily at doses.

We select the next window, which is exactly what we need to recover a forgotten password in Windows 7, and here the fun begins.

The next window will appear System Recovery Options, where we look at the system drive letter, which will be very useful later.

We press and on the monitor or laptop display, which doesn’t matter at all, the System Recovery Options window will appear, and there will already be quite a few options, but from all the variety you need to choose exactly.

Using the command line to recover a forgotten windows password

The Windows command line will be required to make some adjustments to the operating system. A problem may immediately arise, although by default on most computers Windows is installed on the disk, here your system disk will have a completely different partition letter, here you will have to work a little if you did not remember the partition letter specified earlier in System Recovery Options and find the correct letter disk.

To find the drive letter we need to recover the password, enter the command at the command line:

Bcdedit | find "osdevice"

To which you will immediately receive an answer:

Partition = D

In the example, it was the system drive, but you may have a different letter, usually this. In subsequent steps, you will need to use the resulting partition letter. To begin the next step of recovering a forgotten password, you need to enter the following on the command line:

Copy d:\windows\system32\sethc.exe d:\

Where is the letter of your drive, and after pressing the key you will receive confirmation of copying the file, then you need to enter in the line:

Copy d:\windows\system32\cmd.exe d:\windows\system32\sethc.exe

Click again and you will be prompted to enter YES (yes) or NO (no), enter and a new confirmation for copying the file will appear. For information: a backup copy of the Sticky Keys utility was made, and then it was replaced with the command line.

Toxicities that occurred with greater severity or frequency in previously Order Scopolamine (Transderm Scop) prescription without review One patient died one month post treatment and two patients recovered without further sequelae.

Recovering a forgotten password turns into replacing it

Now we remove the bootable DVD, possibly USB, depending on what was used, and reboot the computer. After the password entry screen appears, you need to press the key 5 times in quick succession - this will bring up the command line. In the prompt field you need to enter Net User, and then the username you used previously and the desired password. You can remind yourself of the username on the windows login screen.

For example, your login name is Cyber, and the desired Engine password, you must enter:

Net User Cyber ​​Engine

After clicking, your account name will remain the same, and the password will change to the recently entered one, and now you can safely log in to Windows 7.

Previously, the operation, which was carried out on the command line, was needed to obtain a backup copy of the sticky key utility sethc.exe and replace it with cmd.exe, and now after logging into Windows and rebooting it, again using the command line you need to return the file back. To do this, boot again from the boot disk and repeat our steps right up to the command line, into which you need to enter:

Copy c:\sethc.exe c:\windows\system32\sethc.exe

You can check the effectiveness of the operation on the screen for entering logs and passwords by pressing 5 times; instead of the command line, we get sticky keys.

In fact, this step is optional and you can skip it.

This command was the last and now you can help not only yourself, but also a friend who accidentally forgot his Windows 7 password and doesn’t know what to do now.

ProComputer.su

What to do if you forgot your user password to log in

People often contact me with the following questions: “what to do if you forgot your Windows password”, “how to unlock your password”, “how to reset your Windows password”, etc. Today I will tell you how to get out of a situation if one of the computer users has forgotten the password to log into the system. And also what to do if the computer administrator forgot the password.

If one of the computer users has forgotten the password, the administrator can reset it and create it again without any problems. But what to do if the administrator himself forgot the password? Let's consider all cases in order.

Situation one: On one of the computers on the network there are at least two accounts: this is a user account and your administrator account.

If the user has forgotten the password, then you log in to the system using your account. Then on the desktop, right-click on the “My Computer” icon and select “Manage”: Next, expand the “Utilities” section and select “Local Users and Groups”. Click here on the Users folder and all existing accounts on the computer will be displayed in the right window. Right-click on your forgetful user name and select “Set Password”:
A warning window will appear - click “Continue”:
You can then set a new password for the user. If you leave the fields here empty and click “OK”, the password will be empty: After this, you can restart the computer and the user will log in with the new password.

___________________________________________________________________________________

Situation two: You don’t remember your administrator password, or you are the only user of the computer (but again, you don’t remember the password).

In this case, we need to log in using the Administrator account built into Windows. Most ordinary users are not even aware of its existence. This account is not password protected by default.

You can log in as Administrator either through the classic login window or in Safe Mode.

The classic window is called up in the following way: after turning on the computer, while on the welcome page, press the key combination Ctrl+Alt+Del twice. In the classic login window, manually enter the name Administrator (in some cases Administrator) - click “OK”.

To enter Safe Mode: After turning on your computer, press and hold the F8 key on your keyboard. Then select “Safe Mode” and press Enter. In the next window, in addition to your account (or entries), the Administrator account will be displayed - log in to the system under it.

Personally, I prefer to log in through the classic login window: it’s more convenient and faster. In addition, on some computers, the keyboard and mouse refuse to work in Safe Mode, so even if you get into this mode, you can’t do anything there.

Regardless of how you logged into your Administrator account, then we do the same thing as I already described above. Namely: find the “My Computer” icon on the desktop and right-click on it and select “Manage”.

Next, expand the “Utilities” section and select “Local Users and Groups”. Click here on the Users folder and all existing accounts on the computer will be displayed in the right window.

Right-click on your account name and select “Set Password.” A warning window will appear - click “Continue”. You can then set a new password for the user. If you leave the fields here empty and click “OK”, the password will be empty. After this, you can restart your computer and log in with a new password.

____________________________________________________________________________________

Situation three: But what to do if the built-in Administrator account is under a password and it is unknown to us? Should I reinstall windows? Of course not! We can solve this problem if we use the ERD Commander emergency recovery boot disk.

You can download the archive with the image of this disk intended for restoring Windows XP here. After this, burn the image to a CD or DVD (for example, via Alcohol 120%). Then insert the recorded disc into the computer drive and configure the BIOS to boot from it.

During boot, you will see the following on the screen: Then, when launched, ERD Commander will try to detect and configure network cards - skip this operation by clicking the “Skip Network Configuration” button: Next you need to connect to your operating system. To do this, select the windows system folder and click “OK”:
We wait for the download to finish (from a CD, naturally, it is slower than from a hard drive). After a while we will see a desktop on the screen that is almost no different from the usual Windows XP desktop:
Go to “Start” – select the section “System Tools” – “Locksmith”: The Locksmith utility (Password Change Wizard) allows you to change passwords for administrator and user accounts.

In the welcome window that appears, click “Next”.

In the next window, in the “Account” field, select the account for which you forgot the password. In the “New Password” and “Confirm Password” fields, enter the new password.
Click the “Next” button. In the last window, click the “Finish” button and restart your computer. Don't forget to set the BIOS to boot from the hard drive. That's all! Now you can log in to your account with a new password.

ATTENTION: If none of the proposed methods helped you, then read my new article “How to easily reset a forgotten password in any version of Windows.” There I described in detail how you can remove a user password in Windows 10, 8.1, 8, 7 and XP.

blogsisadmina.ru

What can you do if you forgot your password on your computer?

Anyone can forget the password for Windows 7 or Windows 8. Fortunately, its restoration does not require any specific skills or abilities. With due care, within a few minutes you will be able to unlock your computer.

All modern operating systems have password protection, and it doesn’t matter what kind of computer you have. This is necessary to prevent unauthorized people from using your personal device. The password does not allow you to open the system by simply turning on the PC. But perhaps you have forgotten this password and do not know what to do. This may happen unconsciously, or perhaps you recently installed a new OS and have not yet had time to automatically remember the password. How can I remove the lock that prevents me from logging in?

If you have a computer running Windows 7 or Windows 8, then the password recovery process will not take you much time. Sometimes, to unlock your computer, you may need the installation disk from which you installed the operating system. It is often impossible to recover a password without such a disk. So, what to do if you forgot your computer password?

Password recovery on Windows 8

To log into a computer running Windows 8, you do not need to reinstall the operating system. Follow these steps:

1. Make sure that the PC is connected to the network; it cannot be disconnected while you are resetting the password;
2. When you log into Windows 8, click on the power icon (located in the lower right corner);
3. Press the "Shift" key and do not release;
4. From the menu that opens, select “Reboot”, the “Select action” window will open.
5. You need to enter “Diagnostics” by clicking on it with the mouse;
6. Click on the line “Return to original state”;
7. Click Next;
8. Wait until the Windows 8 system recovers. If the device does not have an installation disk, the system will ask you to insert it, otherwise the recovery will not complete;
9. Then "Just delete my files" will appear. You need to select this item.

If everything is done correctly, the Windows 8 computer will return to its original state and you can create a new user. However, it is worth considering that all data from your PC will be deleted without the possibility of recovery. Therefore, you first need to back up your files to an external storage device.

Password recovery on windows 7

A user, if he has forgotten the password on his computer, can log into the computer on Windows 7 in two ways: unlock the system using the Windows 7 installation disk and save the password on a flash drive (or any other external storage device).

Using the Windows 7 installation disc

Follow these steps:

1. You need to turn on the computer;
2. Then insert the disc;
3. When it loads, click on “System Restore”, a new window will open;
4. Select the OS for which you forgot the password (if more than one OS is installed);
5. Click “Next”, the following window will open;
6. Select “Command Line”;
7. Type “regedit” and click Enter to go to the registry;
8. In the editor, highlight “HKEY_LOCAL_MACHINE”;
9. Open the "File" menu;
10. Click “Load hive...”, a new window will appear;
11. Go to C: windowssystem32config and left-click “system” twice;
12. Come up with a name for the new branch;
13. Go to HKEY_LOCAL_MACHINE, open this thread;
14. Highlight "setup";
15. Right-click on “SetupType”, then “Change...”, the following window will appear;
16. In the “Value” line, press 2, then “OK”;
17. In the registry, right-click on “CmdLine”, then “Change...”;
18. In the “Value” line, enter “cmd.exe”, then “OK”;
19. Exit Registry Editor, launch it again;
20. Go to HKEY_LOCAL_MACHINE;
21. Select the created branch, then “File” – “Unload bush...”;
22. After closing all windows, reboot the system. When rebooting, remove the installation disk;
23. When the computer turns on, the command prompt will appear. Write in it “net user name of the created branch password” (for example, “net user Vasily Administrator 2222”);
24. Then click Enter;
25. Close the window when Windows 7 starts, enter the password. You should now be able to log in.

Flash drive for password

If users of Windows 7 OS have forgotten their password, it is possible to log into the system and unlock the password using a special function for creating a flash drive. To create such a flash drive.

The king walked into the palace.

The guard demanded: “Password?”

And the king replied: “Damn!”

The verse will pass for third grade!..

You forgot your password Administrator. What to do?

There is a lot of advice on the Internet about what to do if you have forgotten your password. Administrator, – advice ranging from harmful to useless.

For example, I strongly do not recommend for password reset Administrator delete files SAM* (\WINDOWS\system32\config\). After this, major problems are possible, including reinstallation OS! As a rule, it is not possible to boot the system; a window appears when loading lsass.exe – System error with the message “Failed to initialize SAM due to the following error: The device attached to the system is not working. Error status: 0xc0000001. Click OK to shut down the system and reboot in safe mode, see the event log for details." After pressing the button OK the computer will reboot and so on ad infinitum.

There is also this advice: delete the file logon.scr (\WINDOWS\system32\), and the file cmd.exe rename to logon.scr. After the reboot, supposedly after 15 (!) minutes it should (?!) open, in which you need to type EXPLORER, after this you can supposedly log in with the rights Administrator.

Nothing will come of it!..

Password recovery

To complete this procedure, you must be logged in with your account. Administrator or group member Administrators(If to the network, then network policy settings may prohibit this procedure).

Click the button Start -> Settings -> Control Panel ->;

– on the tab Users select the name whose password you want to change and click the button Password reset;

– enter and confirm a new password (to change the password) or leave the fields empty (to reset the password) –> OK.

Notes

Resetting your password using the built-in account Administrator(V )

When booting/rebooting, press F8;

- V Windows Advanced Boot Options Menu select ;

– select a built-in account Administrator (Administrator), which is not password protected by default (you can select any account of any member of the Administrators group for which you know/or do not have a password);

- in the window Desktop with the message that Windows works in Safe Mode, press Yes;

– after loading Desktop click Start –> Control Panel –> User Accounts;

– click the icon of the account whose password you want to reset;

– select the item on the left in the menu change Password;

- in the window Changing your account password<Имя_учетной_записи> enter and confirm a new password (to change the password) or leave the fields empty (to reset the password);

– press the button Change password;

- close the window user accounts;

- close the window Control Panel;

– reboot.

Reset your password using Windows

Click Start -> Run... -> Run a program ->cmd–> OK;

- in the window that opens Command interpreter after the system prompt, enter control userpasswords2

– a window will open user accounts;

- in field Users of this computer select the desired account;

– uncheck the box Require username and password –> OK(or below in the section User password<Имя_пользователя> click Change password... –> in the window Change Password enter and confirm a new password (to change your password) or leave the fields blank (to reset your password) –> OK –> OK –> OK);

- in the window that appears Automatic login enter and confirm a new password (to change your password) or leave the fields blank (to reset your password) –> OK;

– in the command line window, enter exit (or just close the window);

– reboot.

How to reset your built-in account password Administrator

If the built-in account Administrator computer is also “safely” forgotten password, you can use emergency recovery boot disks like Windows miniPE edition or ERD Commander.

1. Disc Microsoft Windows miniPE edition contains a stripped down version Windows XP.

For loading miniPE needed in BIOS install boot from CD-ROM"ah, put it in the tray CD-ROM"and the boot disk with miniPE and reboot;

- when it loads miniPE, press the button miniPE(alternative to button Start) –> Programs –> System Tools –> Password Renew;

– a window will open ;

– click the button Select Windows Folder(bottom right);

- in the window Browse for Folder specify the folder location Windows and press OK;

– press the button Renew existing user password;

– in the drop-down list Account select the desired account;

– in the text field New Password Enter a new password;

– confirm it in the field Confirm Password(remember the new password!);

– click the button below Install;

– a window will appear Information with a message Password Renew for NTs is successfuly done!;

– click OK;

- close the window Password Renew for XP-based Systems;

– press the button miniPE –> Reboot;

– after reboot, install in BIOS booting from hard drive;

– you can boot the system with a new password Administrator.

2. ERD Commander is a bootable emergency recovery disk, such as Windows miniPE.

When booting from disk ERD Commander in the boot menu select ;

– to skip local network initialization (and speed up loading!) click the button Skip Network Configuration;

- in the window Welcome to ERD Commander select OS to restore, click OK;

– after loading ERD Commander click Start –> System Tools –> Locksmith Wizard –> Next;

– in the next window in the drop-down list Account select the desired account;

- in field New Password enter a new password, confirm it in the field Confirm Password –> Next –> OK;

– press the button Start –> Log Off –> Restart –> OK;

– after reboot you can log in with a new password Administrator.

Notes

1. Any (!) information can be used for both good and evil: it all depends on who uses this information and for what purpose... I hope that you need this information for a good purpose: you forgot the password on your (! ), don't reinstall!..

2. Using a password increases security. If there are several running, personal settings, programs and resources will be better protected if a password is assigned to the login name or account name.

3. Built-in account Administrator present in the welcome window Welcome only if no other accounts exist (except the account Guest), or if loaded in .

4. lsass.exe [LSA Shell (Export Version); 11,5KB] – Security Account Manager(disk address – \WINDOWS\system32\)

Purpose: Is a local security authentication server (security mechanism process Microsoft Windows), creating a process responsible for checking for the service Winlogon. This process uses authentication packages such as Msgina.dll. If authentication is successful, the process lsass.exe creates a user access token that is used to launch the shell. Other processes that are initialized inherit this token.

Stores security information for the local account. Responsible for local security and login policy. The program is necessary for stable and safe operation, so it is not recommended to interrupt its operation.

Settings: Start -> Settings -> Control Panel -> Administrative Tools -> Services -> Security Accounts Manager -> Properties.

Startup type – Auto. Login with an account.

Dependencies: Depends on Remote procedure call (RPC). From Security Account Manager depends Distributed Transaction Coordinator. If this service fails, it reboots. Recovery actions are not supported for this service.

Sometimes under the name lsass.exe a network worm or Trojan is hiding. The most famous network worms Sasser, Nimos And Lovgate contain an executable file named lsass.exe.

5. You can try to crack the password using special programs (a long and tedious process!).

6. Reset the password using the password recovery/reset diskette - see.

Valery Sidorov

In the modern world, which is filled with various computers, gadgets and other smart equipment, it has become almost impossible to live without passwords. We all hide something, hide it from prying eyes, put locks, invent security codes, etc. And everything would be fine, but at one fine moment each of us may find ourselves in a situation where we have forgotten the access password.

And it doesn’t matter for what reason this happened, maybe you haven’t used it for a long time or it’s due to the fact that one of your “well-wishers” replaced it to spite you. In any case, the problem must be solved somehow. Today we will look at a situation where a user has forgotten his computer password. What to do? Is it possible to do without reinstalling the operating system? You can find out the answers to these questions by reading the article.

I forgot my computer password. What to do?

There are several ways to solve this problem. It all depends on which account the password was created on. If it’s yours, then it’s not scary and can be easily solved. But if the password is on the Administrator account, then you will have to work a little. So, let's look at all these possible cases in more detail.

Problem #1. The password is on your account. In this case, to unlock your computer, you will need to log in as an Administrator. And for this:

• Turn on your computer and while it is loading, press the F8 key.
• Select from the proposed options for loading the operating system "Boot to" and press the "Enter" key.
• In the window where it will be suggested which account we would like to log in under, select “Administrator”.
• The computer booted. Go to the Start menu, then open Control Panel. We look for the “Account Management” item and delete the entry whose password was forgotten.

Don't rush to restart your computer. Now you will need to create a new account. And so that in the future you don’t have to ask again: “I forgot my password, how do I turn on the computer?”, you can no longer install protection on it. That's all, all that remains is to restart the PC and log in as usual under your new account.

Problem #2. The password is on the Administrator account. In this case, you will not be able to log into the system. Therefore, try loading the file manager from the OS installation disk. Copy everything you need from the system folders. Reinstall Windows. If you have never done this yourself, then it is better to invite an experienced programmer to your home.

Problem #3. I forgot my computer password. What if it was installed from the BIOS? If this is the case, then you will need to reset it to the "Default" state. For this:

• Study the instructions for the motherboard and find where the BIOS reset jumper is located.
• Turn off the computer and open the system unit cover.
• Find and put it into reset mode.
• Wait a few seconds and return it to its original state.
• Close the case and turn on the computer. You will no longer need to enter the security code.

As you can see, the situation when a user has forgotten the computer login password is, in principle, solvable. But it could have been avoided! So here's my advice: keep all your codes somewhere in a secluded place, written down on a piece of paper so that you can remember them at any time. But if, dear users, one of you has forgotten your computer password, you already know what to do and how to solve the problem!