How to wake up from sleep mode windows. Turning on the computer after sleep or hibernation

There is no single solution on how to wake a laptop from sleep mode. The bottom line is that all devices are different, and for some laptops, you can only exit this mode using the power button. Sometimes, to “wake up” your laptop, you just need to press any button on the keyboard or simply open the lid. The technique depends on the characteristics of the model, and exact information can be obtained from the manual for the device.

How to wake up a laptop from "sleep" mode?

Each manufacturer issues its own methods, since it programs the device with its own methods. However, on most laptops, waking up from sleep mode involves either pressing the power button or clicking the mouse.

Let's consider some situations:

1. If the laptop freezes in sleep mode.

Common causes of freezing are: failures in the settings, a heavily discharged battery, a process error. It is impossible to enable it by standard methods, so it is worth trying alternative methods.

To begin with, the laptop is connected to charging and the Fn or Power key is pressed. It is worth pressing Reset at the bottom of the laptop platform. It provokes a restart of equipment and erases processes that prevent it from working correctly. Reboot can also help, but open documents that you have not saved disappear. Removing and inserting the battery helps wake the device from sleep mode.

2. "Wake up" on Windows.

If a model 7 or 8 system is provided, the function is disabled by a simple method. The manipulation algorithm will be as follows:

click on the charging image and once with the left button on the mouse on the inscription
indicating advanced power settings
select item with settings
then turn off the function.

3. Disable the function by closing the notebook.

If it becomes necessary that the option on the laptop is not activated when the lid is closed, you will have to open the special sleep mode settings in order to change the settings. The mode is disabled in the newly opened window.

When sleep mode does not function with the device lid closed, the device should always be turned off. This action is required to protect the screen from excessive heat.

Other Notebook Features

With the exception of sleep, two modes have been developed - hybrid and hibernation. These options can be turned off, but often this should not be done so as not to increase the load on the laptop.

With hibernation, the session will be saved when the laptop is turned off. Hybrid - used mainly for personal devices with the eighth version system. For example, at the moment of a sudden turn off of the light, the device switches to this mode, and after turning on the device, the functions will return.

Computer sleep mode, which is also relevant for Windows 7, is a great invention for those who actively and daily use this technique, but do not want to greatly increase energy costs. In this case, the screen of a PC that has not been used for some time is turned off, and the computer switches to saving power consumption for a while, and if necessary, use the computer device again, Windows 7 itself wakes up. The most important thing is that the current session is completely saved, with all the tabs and programs open by the user, which can then be used again, but to ensure this result, it will be important to know how to exit Windows 7 sleep mode.

The way to wake a particular computer from sleep mode depends on many factors and settings, and above all, on the settings specified by the manufacturer, the specific type and model of the device, because in each case there may be some nuances. For example, methods suitable for laptops are sometimes not suitable for stationary PCs, and vice versa, but there are some virtually universal methods that turn out to be relevant for a great many gadgets of this kind. So, it is often necessary to press certain buttons to bring a "sleeping" computer back into the active state while retaining the tabs previously used during the current session.

Moreover, in most cases, to wake up from sleep mode, you need to lightly press the power key, indicated by a circle, partially crossed out with a small little picture, and this method works with many desktop computers and laptops. For the latter, the list of keyboard buttons required to return the device to the "wake" state may be slightly wider - in some cases, you will have to press, for example, Fn, although for some laptops everything is even simpler. A number of laptop models have such settings that they can be exited from sleep mode by pressing almost any key on the keyboard and even the mouse, which will give the system a signal to resume the current session.

By the way, with Windows 7 laptops, sometimes the usual lifting of the sash on which the monitor is located above the keyboard and transferring it to a virtually vertical position also works. This method is especially relevant in those cases when switching a portable PC to a "sleep" state was carried out by folding it, i.e. connections of the leaves in a horizontal position, respectively, the reverse action and the effect should be appropriate. However, sometimes it happens that, despite the implementation of any of the above actions, the computer or laptop does not wake up - Windows 7 does not work properly to allow such a transfer.

In a situation of this kind, the most important thing is to try to find the reason for the failure of the system settings, and the first thing that requires especially close attention in this regard is the state of the battery, however, this moment is relevant only for portable computers equipped with a battery. If it was not properly charged even before switching to sleep mode, then it is possible that, even while in it, the device will gradually be discharged, which is why it will stop responding to pressing any buttons. Therefore, if there are problems in bringing the laptop to an active state, it is advisable to first connect it through a suitable power cord to the mains, to recharge a possibly discharged battery.

It is advisable to start repeated attempts to transfer a portable PC from sleep to active mode not immediately after connecting this gadget to the mains, but wait at least a dozen minutes for the battery to gain a small reserve of charge. This should be enough to start the system, which you should try to do by pressing any of the above keys: power, Fn, or another, pressing which leads to the activation of the computer. By the way, even for stationary PCs, a lack of power can sometimes become an obstacle to waking up from sleep mode: perhaps there was a power outage or the power cord was damaged.

In the case when it is not at all about electricity, it is possible that the problem with waking the computer from sleep mode lies in a system failure or violation of any settings that happened while it was in this state. To eliminate such problems, the restart button is useful: for stationary PCs, it is usually located on the system unit next to the power button, and for laptops - at the bottom; pressing it allows you to restart the system while maintaining the current session. If, for some reason, it is not possible to resolve the difficulties with waking your computer from sleep mode on your own, it is not a sin to contact a qualified master for this.

If you leave your computer turned on for a while, it will go into low power mode, in other words, sleep mode. Sometimes it is difficult to get out of this mode, you can try several options. If they did not help you, then only a specialist can fix the problem.

Instruction

Move the mouse, it is possible that the computer just went into standby mode, and when the mouse is active, it will wake up.

Press the Esc key. The computer should turn on. In some cases, the inclusion must be confirmed. To do this, click on the confirmation window.

Press the Power button or the keyboard shortcut Ctrl+Alt+Del. The computer should wake up from sleep mode.

If pressing the keys does not help, then start the computer using the Reset button. All running applications, before entering sleep mode, should be saved. Data will not be lost.

Desktop computers have an emergency shutdown button. As a last resort, you can use it. It is located on the back of the system unit. Click on it, wait a few seconds and click again.

Start your computer in normal mode by pressing the Power button.

If you're having trouble waking up from sleep, disable this feature. Go to Desktop Options. To do this, right-click on the desktop. A window will appear, select "properties" and click the left mouse button. After the main properties of the desktop appear, select the "screen saver" item. Find the inscription "power" and click on it. Then press the "sleep mode" key. Uncheck the box "allow the use of sleep mode". Restart the computer.

Tip added on December 12, 2011 Tip 2: How to wake up your computer from hibernation To conserve power, the Windows operating system has two modes: standby and hibernation. The difference between these two modes is that when you select sleep mode, all the contents of the memory are saved to the hard disk and it takes longer to return to a working state of the computer. Sleep settings are controlled by the Power Options component.

Instruction

To wake the computer from sleep mode, press any key on the keyboard or move the mouse. If pressing arbitrary keys does not lead to anything, enter the key combination Ctrl, Alt and Del or press the Esc key.

If this action does not help either, press the Reset button on your computer case or move the switch on the back of the computer to the "Disabled" state, turn it back to the "On" position and press the Power key on the front panel. In this case, the "Desktop" will have to be restored in the same form as it was before the transition to sleep mode.

If the system asks for a password when waking up from hibernation, enter the same password that you use to log in when the operating system boots. This prompt is displayed when a screen saver is used before entering sleep mode.

To turn off the password prompt when waking up from sleep, open the Display component. You can do this in one of several ways. Right-click on a free area of the "Desktop" and select "Properties" from the drop-down menu.

Alternatively, open the Control Panel from the Start menu and left-click on the Display icon in the Appearance and Themes category. In the window that opens, go to the "Screensaver" tab and uncheck the "Password protection" field. Apply new settings.

To disable or adjust the sleep mode settings on your computer, on the same "Screensaver" tab in the "Display Properties" window, click on the "Power" button in the "Energy Saver" group. The Power Options component opens.

You can call it in another way: the Start menu, Control Panel, Performance and Maintenance category, Power Options icon. In the window that opens, go to the "Power Schemes" tab and set the options you need to control the computer's transition to sleep mode. Apply new settings, close windows.

How to wake up your computer from sleep mode - printable version

Hi all! The question of how to wake up a computer from sleep mode is often asked even by experienced users. At the same time, most of them sometimes confuse two similar states of the system, not understanding the principle of their operation. Therefore, before giving an answer, it is necessary to understand the features of the operation of this mode and its importance.

Before the advent of the Vista operating system, there was one standby mode that involved turning off the monitor and some computer systems, but keeping open programs that you can return to at any time. However, with the advent of new versions of "Windows", such a thing as "" appeared. As a result, it also began to be perceived as a sleep mode.

Usually, when they say: “put the computer to sleep,” they mean the action that the system performs when the “sleep” button is pressed. As a result, all computer blocks are de-energized, but power continues to flow to the RAM. It must be remembered that if there is a power outage, then all data will be lost. That is why laptop owners most often use this mode, since they have a battery and they are not afraid of such problems.

Hibernation - involves the almost complete shutdown of all systems. In this case, the data from the RAM is saved to a specific location on the hard disk. After leaving this state, they quickly recover. This is very convenient because you do not have to reopen work programs if you leave your computer for a while.

Automatic setting

When answering the question of how to set sleep mode on a computer, first of all, it is recommended to configure the automatic system. So your device will go into the selected state after a certain time after the last action. This will extend the life of all elements of the computer by reducing energy consumption.

To set up automatic transition, you need to go to the "control panel", then go to the "hardware and sound" tab, and then select the "power" section. In it you will find the item "setting the transition to sleep mode".

There you can set the time interval after which the transition to this state will be carried out.

If you are still using Windows XP, you will need to right-click on an empty area of your desktop to access these settings. In the menu that appears, select "Properties". Next, you need to click on the "Display Properties" tab, and in it open the "Screensaver" item. It is in this section of the menu that the “Power” item is located, which allows you to set the sleep mode. The time of its inclusion is determined by the screensaver itself, which means that it can be adjusted by it.

Manual switching

When you are told "put the computer to sleep", it is assumed that the system needs to be put into this state immediately. To do this, there are several ways that you can use.

Some keyboards have a dedicated button that allows you to toggle. However, such an addition is not available on all input devices, which makes this method not the most common.

If you are the owner of a laptop, then to perform this action, you just need to close the lid. Almost all devices of this type have this feature, since this mode is ideal for working with them.

To go to sleep on your own, you must press the "Start" button. Next, next to the "turn off the computer" button, you should find a small arrow, which you also need to use. In the menu that appears, select the “sleep” item, which will transfer the device to the state we need.

Or press alt+f4 on the desktop

In order to exit sleep mode, you must perform one of the following actions:

you can just move the mouse;
pressing the computer mouse button will also bring the computer out of this state;
the power key is also able to wake the device from sleep;
pressing the keyboard button also allows you to return the equipment to work.

Some experts, answering the question of how to remove sleep mode on a computer when it comes to a laptop, suggest simply lifting the lid. However, this does not always work and sometimes you have to press any button on the keyboard.

In fact, any action that the system perceives as ready to work wakes the computer from sleep. At the same time, the time spent on this is much less than with standard inclusion. That is why this mode will always be very popular.

This can happen to anyone: the user's computer goes into standby mode, and after some time, when waking up, it does not wake up, showing a black screen or BSOD - blue screen of death. The problem is not so common, but still occurs. Much worse is that it is far from possible to cope with it in all cases, but we will still try to do it.

Update your video card driver

The first and one of the easiest solutions that can help is updating the graphics card driver. I will not describe this process, since I talked about it in detail in an adjacent article.

The main thing - be sure to do this easy operation, which can easily solve your problem.

Prevent the mouse or keyboard from waking up from sleep mode

In this case, the problem may be due to the fact that when waking up from sleep mode, some USB devices do not properly support this very mode, resulting in an error. Therefore, you need to disable one of these devices. Please note that you cannot turn off both devices at the same time, since in this case you will not be able to wake the computer from sleep mode at all. Therefore, first turn off, for example, the keyboard and, if the problem is not in it, turn off the mouse, without forgetting to turn on the keyboard along the way.

This is how it is done. Go to the task manager (for example, press WIN + R and in the Run window type the word devmgmt.msc, then click OK). Here, select a device, such as a mouse. Right-click on the device and select "Properties".

Prohibit turning off the hard drive

Here we will look at turning off the power of the hard drive when going into standby mode. To do this, go to the control panel and select "Power Options". In the new window, select the setting for the current power plan.

Then click "Change advanced power settings".

In the advanced settings window, in the "Hard disk" subsection, in the "Turn off the hard disk after" item, set the value to 0 and click OK.

This must be done if there are problems with the hard drive when resuming from standby.

What else?

The problem may be related to the hard drive itself, or rather, to its performance. The hard drive should be checked using a special utility.

Often, experts recommend updating the BIOS to the latest version. And this method helps.

For windows 7, you can try disabling the Aero theme.

On some video cards, according to Internet users, the problem is not treated. The only solution is to replace the video card itself. Of course, in this case, it is much easier to refuse to use the standby mode altogether.

fulltienich.com

Sleep mode windows 7: features and settings

In this article, we will talk about all the most important aspects of setting up "Sleep Mode" in the Windows 7 operating system.

The topic of the article, as you may have already noticed, is very interesting, so I ask you to read the entire post to the end, and only then repeat all the described manipulations with sleep mode.

Below I will present the settings for windows 7 and Vista.

Sleep setting

In order to configure the computer to go to sleep after a specified period of inactivity, you must configure the settings in the corresponding section of the Windows 7 Control Panel.

Open the Start menu and select Control Panel. If the panel view is enabled by default in Category mode, change it to Small Icons mode.

Look in the list of elements for a link to the "Power Options" item. Here, as the name implies, tools for configuring the system's power settings are hidden (if you are using a desktop computer, we recommend that you activate the standard "Maximum Performance" plan by default).

In order to start setting up sleep mode, click on the link "Setting up a power plan", opposite the plan activated by default.

The screenshot below shows an example of displaying the settings menu on a laptop. If you are setting up a desktop computer, the Battery Power section will not be displayed.

Select the period of time you need after which the computer will be put into sleep mode. Gradation - from 1 minute to 5 hours.

If you use the “Sleep Mode” (“Standby Mode”) in windows 7 or Vista, then you probably noticed an unpleasant feature - the slightest movement of the mouse brings the computer out of rest (for example, if you accidentally hit the table).

Disabling waking up from sleep using the mouse

Sometimes this is very annoying. For example, the system may wake up the computer while watching a movie on the home theater when high volume sound effects cause the furniture to vibrate.

To get rid of this inconvenient feature of the system, you must do the following:

Open the Start menu »
Control Panel "
Device Manager "
Mice and other pointing devices tab

Power Management Tab

Uncheck the "Allow this device to wake up the computer" option and Click OK.

After applying this setting, the computer will no longer wake up from sleep due to accidental mouse shaking.

In the future, to bring the system out of standby mode, use the keyboard - just by pressing any key.

kompiklava.ru

How to wake up from sleep mode if windows does not wake up from it

Frankly, this is not what is called a "problem on the head." Like, the sleep mode is “no one needs it”, and then there are problems with getting out of it.

No, not at all.

Hibernation can be very useful:

Especially for laptops that are not turned off for days. At the same time, the user does not constantly sit at the computer, and if we are powered by a battery, then we inexorably sit down on it. Hibernation saves the entire RAM image in a separate file and turns off the power. This is how the battery is saved.
Moreover, the subsequent boot “through the image” is much faster, and Windows returns exactly to the point from which it left. And when you exit, there is no need to even save the accumulated files if you continue working with them.

In general, getting out of the "sleeper" is a very useful thing. But if it did not give rise to a problem, the system refuses to “wake up” when turned on.

We analyze simple and well-known reasons

The reason why the computer does not wake up, this applies to windows XP or windows 10, is most likely systemic in nature, therefore, it will have to be dealt with at a global level.

For this:

Typical for windows 7

Adherents of windows 7 may encounter the following. In this system, the hard drive power off time can be set after a specified time the computer is in sleep mode.

windows 7 has a standard setting to turn off the hard drive 20 minutes after going to sleep. The next time you try to return to work, the system either takes a very long time to load or the computer does not turn on at all.

No need to tease the geese, and turn off the power off function altogether. For this:

The result of all these wanderings will be a constant supply of power to the screw. As a result, the solution to the problem in windows 7, if the laptop does not turn on after it went into a "sleepy state".

Let's talk about USB devices

This problem of the first windows with USB has long gone, when they did not recognize or incorrectly installed the driver for this bus. Nevertheless, we can still feel the echoes of that trouble today when windows 8 does not wake up due to the fact that some USB devices do not allow you to start working “from sleep”.

Among the devices, first of all, we note the simplest ones - a mouse and a keyboard.

Thus, while I sleep, I turn off the mouse and try to “wake up” only with the keyboard. If it's not the mouse, then I change the combination on the contrary - I connect the mouse, turn off the keyboard and turn on the computer with the mouse. What is interesting, and such a focus sometimes passes. But according to the “science of switching off”, you still need to act differently:

Small nuances

It cannot be said that the problem under consideration has a definite solution once and for all. Not all options are guaranteed. Therefore, we advise you not to forget the following nuances:

Sometimes updating the BIOS version helps.
He really dislikes sleep mode in windows 7 with the Aero theme, if you are a sleep mode lover, you will have to choose one thing.
As practice shows, with some video cards the problem has no solution at all. In this case, you will have to decide which is more expensive - a video card or sleep mode, and make a choice. Many stop on the map, and, probably, this is correct.